ShopShield™ Breathable CPU Cover

Custom, made-to-order ShopShield™ Breathable CPU Cover.

• Protect your CPU/tower 24 hours a day – no wasting time installing and removing covers.
• Easily installs in a few minutes!
• A door flap is included for you to install if desired giving you access to CD drives and more.
• Made in the U.S.A by your friends and neighbors.
• Very economical compared to expensive enclosures and cabinets saving you money.
• Saves space – no significant extra room required.

Made with filter fabric using our Expansive Passive Filtration (XPF) System.

• The XPF System works by using basic concepts of pressure in physics, specifically Force Per Unit Area, P=F/A. The fully encasing cover creates a very Expansive area (A) reducing the amount of air pressure (P) required to introduce a large amount of fresh air to the CPU. So, Passive air is sufficient to infiltrate the cover and cool the PC, unlike solid enclosures that require fans.

Without Protection Dust can blanket sensitive electronic components causing overheating. How do these covers protect your CPU, data and irreplaceable photos?

• Filters all incoming air to protect internal components and prevent corrosion and overheating.
• Keeps dust, debris, and other foreign objects out of cooling vents so airflow is not compromised.
• Especially effective in harsh, dusty manufacturing conditions where dust is a fact of life.
• Tailored seams for a custom, made to size fit.
• 100% Satisfaction guaranteed so you take no risk. Full 6-Month refund or replacement if you have any issues (Quantity of 3 or less. Please test one or two before committing to a larger quantity of these custom made covers as they cannot be resold.). Contact me by email at erik@computerdust.com with any concerns or to initiate a refund.

There are two ways to select the right size

• Grab a tape measure and write down the width, height and depth (front to back) in inches. Then, select those dimensions from the dropdown menus below. Do not add extra to the measured dimensions.
• If you have ordered ShopShield or Dirt Bag (Dirtbag) computer covers in the past and know the model number, use the dimensions from the table below.

SS-0812 – 8″ wide, 12″ high, 12″ deep
SS-0814 – 8″ wide, 14″ high, 14″ deep
SS-0816 – 8″ wide, 16″ high, 16″ deep
SS-0818 – 8″ wide, 18″ high, 18″ deep
SS-0820 – 8″ wide, 20″ high, 20″ deep
SS-0822 – 8″ wide, 22″ high, 22″ deep
SS-0824 – 8″ wide, 24″ high, 24″ deep

Note: The depth listed may be different from your tower and is not critical as long as your tower is under 24 inches deep, which includes most towers. If over 24 inches, select the actual depth from the menu. The open end of the cover is installed toward the back and cinches closed around the cables/cords with an included velcro strap. By design some looseness in the cover is good for added air flow.

Automatic 10% discount when ordering 10 or more covers!